Residential Stucco • Calgary

Residential Stucco Repair & Installation in Calgary

Calgary weather is brutal on exteriors. We repair and install stucco/EIFS systems that look clean, seal properly, and hold up through freeze-thaw cycles.

  • Blended repairs that match your finish
  • New installs for renovations & additions
  • Cause-first fixes (cracks & transitions)
📞 Call 587-576-0646 🧾 Get an Estimate
Residential stucco work in Calgary by High End Construction
Clean blend. Strong details.Texture + edges handled so repairs don’t scream “patched.”
Clear recommendations

Repair vs replace — straight answer, not upsells.

Built for Calgary

Freeze/thaw and moisture movement considered in the fix.

Respect your home

Cleaner sites, cleaner lines, cleaner finish.

Stucco texture detail in Calgary Stucco edge repair detail
WHY HIGH END

Why Homeowners Choose High End Construction

Stucco failures usually start at details: corners, windows, base lines, and water paths. We focus on the parts that make the repair last — then we make it look clean.

  • Finish that matches

    Texture, color, and edges handled cleanly so the repair blends into the wall instead of looking patched.

  • Prep-first repairs

    We address cracks and weak transitions before finish work — because pretty repairs that fail are pointless.

  • Clean job sites

    We keep things tidy and keep you in the loop so you know what’s happening and what’s next.

Benefits of Quality Stucco

Stucco isn’t just about looks. When it’s installed and detailed correctly, it protects your home and reduces repeat repairs in Calgary’s climate.

Built for Calgary homes
Clean stucco finish on a Calgary home
Stucco detail around edges and transitions
Real Project Photos • Clean texture + solid edges

Weather Protection

Helps block wind-driven moisture and handles Calgary’s freeze-thaw movement better when detailed correctly.

Instant Curb Appeal

Fresh, even texture and clean edges can make the entire home look newer—fast.

Lower Long-Term Maintenance

Fixing cracks and weak transitions early prevents water staining and expensive repeat patching later.

Stronger Transitions

Windows, corners, and base lines are where failures start—proper detailing is what makes it last.

Protect Home ValueExterior issues are a buyer red flag. Solid stucco work helps inspections go smoother and keeps your home looking cared for.
BRANDS IN CALGARY

Stucco & EIFS Brands Commonly Seen in Calgary

Calgary homes can have different stucco/EIFS systems depending on the builder and the year. If you’re trying to match a repair, brand + system details matter. Tap a brand to expand.

Good to know: Brand matters most for matching finishes and compatible materials. If you don’t know what you have, we can inspect and recommend the correct repair approach.

Dryvit

EIFS Acrylic finish
Often referenced for EIFS assemblies and acrylic finishes.
  • Matching usually involves texture + color + clean edge transitions.
  • We verify adhesion and water-path details before finishing.

Sto

EIFS Coatings
Known for EIFS and coating systems.
  • Seen on residential and light commercial exteriors.
  • Finish matching is about consistent texture and crisp lines.

Senergy

EIFS Base coat
A brand name you may see tied to EIFS components and finishes.
  • Assemblies can vary—inspection matters before repair.
  • We focus on durable transitions and water control details.

Parex

Stucco/EIFS Finishes
Often associated with stucco/EIFS finishes.
  • Used where consistent finish and clean detailing matter.
  • Matching is texture + color + edge discipline.

Master Wall

EIFS Systems
Another system brand that may show on paperwork.
  • We verify adhesion, cracks, and transition points before finish.
  • Repair goal: blend the finish and strengthen weak details.

Finestone

EIFS Finish coat
Sometimes referenced for EIFS-related components and finish coats.
  • We confirm what’s installed before selecting materials.
  • Clean transitions around windows/base lines are key.

Omega

EIFS Finishes
Often referenced for EIFS finishes and system components.
  • Matching is texture + sheen + edge consistency.
  • We aim for repairs that don’t “telegraph” later.

BASF Wall Systems

EIFS Coatings
Another label that can show up in EIFS/coating contexts.
  • Product lines vary; compatibility matters for repairs.
  • We confirm what’s on the wall before we patch/finish.

Other builder/contractor mixes

Builder spec Varies
Calgary builds can also include contractor-specified mixes (base coats, meshes, finishes).
  • Different components may be used together across years.
  • Inspection is the fastest way to get the correct solution.
Tip: Check old invoicesTip: Take a close-up texture photoTip: Note window/base crackingTip: We can match finish + color
WARNING SIGNS

How to Notice When Stucco Starts Going Bad

The sooner you catch stucco problems, the cheaper and cleaner the fix usually is. Use this checklist to spot early signs — then call before it turns into a bigger repair.

Quick Checklist Early is cheaper
  • Hairline cracks that keep coming backEspecially around windows, corners, and long wall runs.
  • Dark staining or “wet-looking” patchesOften a sign moisture is getting in or not draining properly.
  • Soft spots, bulges, or hollow soundsCan indicate loss of adhesion or issues behind the finish.
  • Flaking, crumbling, or chalky finishSurface breakdown that can become bigger failure if ignored.
  • Cracking at base lines or transitionsWeak points where stucco meets other materials need correct detailing.
  • Interior clues near exterior wallsMusty smell, staining near corners, or odd condensation patterns.
What should I do first if I notice cracks?
Take two photos: a close-up of the crack and a wider shot showing the location (corner, window, base line). Then stop “sealing it” repeatedly — quick fixes can hide the real issue.
  • Track if it grows after a cold snap or heavy rain.
  • Note if it’s near a window/door, downspout, or roofline.
When is a repair urgent?
If you see staining, soft spots, bulging, or repeat cracking in the same area, it’s time to inspect.
  • Staining + softness is a “don’t wait” combo.
  • Bulging is a sign something behind the finish may be failing.
Can you match the texture and color?
Most of the time, yes. Matching is about the right material, texture technique, and blending. If your finish is heavily weathered, we’ll tell you what level of match is realistic and what option will look best.
What affects the cost of stucco repair?
Access, repair size, whether moisture is involved, and how complex the matching is. Small early fixes are usually the most cost-effective.
  • Water-path issues add steps because they must be corrected.
  • Good detailing reduces repeat repairs.

Want a straight answer on your stucco?

Call us and we’ll help you figure out if it’s cosmetic, a simple repair, or something that needs attention now. If you’re ready, use the Contact section and request an estimate.

Call 587-576-0646 Contact Us / Estimate